Outfitting

Power your Bass 100 up with the Jonny Outboard Motor Kit compatible with the Suzuki 2.5hp or Honda 2.3hp outboards. Comes complete with a heavy duty stern mount transom plate, steering handle and neutral to forward gear shift. Installation required. 

*Actual product may differ from 3D rendering shown. We DO NOT recommend anything larger than a 2.5hp outboard on the Bass 100. You will need the Short Shaft version of the outboard motor.

Take control of the Bass 100's tracking and improve your paddling efficiency with a pair of retractable skegs. Perfect when you decide to paddle the boat vs using a motor but can also be used with Outboard. Installation required. 

*Actual product may differ from 3D rendering shown.

Are you a gear junkie, planning to fish or simply need a place to store some snacks? The Jonny EZ Rider Seat Bag provides a conveniently placed storage area behind your seat for those things you quickly need access to. The seat bag easily attaches to the Jonny EZ Rider seat, no tools are needed!

*Actual product may differ from 3D rendering shown.

Sometimes you just need to paddle. This 250 cm alloy shaft jet black Jonny paddle will get you out of those tight spaces, or shallow waters.

• 250 cm
• Alloy Shaft
• Right, Left, or Neutral Feathering Options
• Drip Rings

The V20-600 Deep Cycle, High performance AGM Battery is the perfect battery for powering your fish finder or other accessories. A higher amp battery will be much more suited for powering the Jonny Pods.

Check out this option for more power - https://jonnyboats.com/products/energized-outdoors-lifepo4-lithium-battery

Features:

• Nominal Voltage - 12V
• 20AH
• RC (min) - 40
• CCA - 190
• MCA - 240
• Terminal Posts - 6mm (INCLUDED)
• Dimensions - 7"w x 3"d x 6.6"h
• Weight - 13lbs
• Charging Current - 1.5A - 7A
• Charging Voltage - 14.4V - 14.9V
• Float Voltage - 13.5V - 13.8V

Recommended Charging Options:

• AC Chargers: Any Quality Brand AGM- Smart & Microprocessor controlled- charger with the recommended specs above can be used. Battery Charger Guide.
• Alternator: 14V-15V.
• RV Converter: 14V-15V.
• Solar Panel: 35W-110W.
• Wind Turbine: 35W-110W.
• Charge Controller: 2A-30A

WARNING: Do not use a charger with smaller amperage than the recommended Charging Current shown above. Maintainers should ONLY be used to maintain a fully charged battery but NEVER as a charger.

Operating Temperature Range:

• Discharge: -4~140F
• Charge: 14~140F
• Storage: -4~140F

Temperature Compensation:

• Cycle use: -30mV/C
• Standby use: -20mV/C

For the V2 Uni Track accessory mount, we simplified the design for faster installation, along with strengthening the connection by adding a thumb knob bolt. This improvement will prevent movement once the mount is installed.

• Length - 4"
• Width - 3 7/8"
• Height - 1 1/4"
• Weight - 4.7 oz

Take control of the Bass 100's tracking and improve your paddling efficiency with the “Beaver Tail" Rudder Kit. 

Perfect when you decide to paddle the boat or use the fixed Jonny Trolling Motor Pod. The oversized rudder blade’s action is controlled by a set of foot controls (included with the kit). The rudder system provides the ultimate paddling experience when you find yourself on the water on a windy day or in waters with strong currents. Installation required.

Click here to view install instructions.

*Actual product may differ from 3D rendering shown.

Required for use of the V20-600 VMAX Deep Cycle, High performance AGM Battery available here.

Turn the cockpit of your Bass 100 into a kayak fishing command center with the Feelfree Gear UNI-Track Standard UNI-Bar. It is designed to mount to your Uni-Track system to create an accessible dashboard for all of your electronics, camera and other fishing accessories. The UNI-Bar easily slides backwards and forward. It also includes easy access lure hangers along with integrated ruler that measures up to 30”. 

*Requires UNI-Track Accessory plates sold separately. Actual product may differ from 3D rendering shown.

If you are in need of cold storage space that is reliable, durable, and integrated with the latest technology, then we have your match. The tough roto-molded shell combines ruggedness and durability to withstand the elements year after year. Having a capacity of 25 liters, and foam infused roto-molded polyethylene, this cooler provides ample cold storage space for a big day or days depending on your journey. Stability meets comfort on the lid where you will find a foam platform for seating and comfortable pistol grip for carrying and securing your cooler. Standard with a refrigerator grade gasket, locking capabilities, high flow drain, and a bottle opener, this cooler has you covered from all angles. What is even better is they are available in assorted Camo colors matching the Jonny Boats Bass 100 line.

• Length 17.75"
• Width 14.5"
• Height 14.25"
• Weight 17 lbs
• Internal Dimensions 14" x 11" x 10"

• Comfortable EVA pad on the lid to double as a seat
• Tie-down attachment points and front-mounted bottle opener
• Heavy-duty latches and comfort carry handles
• Comes in four coordinated colors
• Holds 40 - 12oz cans without ice

Show your Jonny pride with the Jonny Boats Brand Logo Decal. Thick, durable vinyl protects your stickers from scratches, water & sunlight.

Looking to power up your Bass 100? Don't be left behind, upgrade your Jonny Boats Bass 100 experience and get there faster with the Jonny Pod Fixed Trolling Motor paired with the Beaver Tail Rudder Kit (sold separately). Features a 40lb thrust electric motor with variable speed control powered by a 12V battery. Use alone or combine with your Outboard for the ultimate Jonny Boats experience.  

*Requires rudder for steering

Zpro 30ah Lithium Battery will fit in the pod. 

• Draw at full speed - 38 amps
• Draw at half speed - 16 amps

• Settings 1 to 4 are gradual incremental increases in the amp draw. Full speed is a jump up to 38 amps.
  

• A 40 or 50 amp hour battery will run for an hour at full speed.

Non-motorized pod for the Bass 100.

Replacement rudder cables for Bass 100 rudder.

• Cables are sold in pairs
• Each cable is 15' in length

When kayak fishing, certain gear is essential but keeping that gear safely stored and secured is crucial. With Feelfree’s Crate Bag, you not only have access to plenty of enclosed storage space but also a place to keep a total of five fishing rods or a stern light secured and high above the waterline. Made of durable water resistant materials, the Crate Bag also features a removable waist pocket for wading, plier holders, map sleeve and a shoulder strap making it easy to carry around.

• Length 18"
• Width 17.75"
• Height 14.5"
• Weight 6.25 lbs

• Fits in the tankwell of most Sit on Top Kayaks
• Top opens for easy access
• Places for up to 5 fishing rods and a stern light
• Removable waist pocket for wading
• Four Camo colors 

• Click here for instructions by Feelfree Gear

This replacement rudder pin assembly includes the following  parts.

• BT Rudder Pin
• R Snaps x2
• 3.5mm Washer
• 1.6mm Washer

Replacement latch for the Bass 100.

This 12V 100AH Lithium Battery is the  perfect solution for powering your fishing adventures. Cut down on weight without sacrificing power.  Built with cutting edge Lithium Iron Phosphate (LiFePO4) technology, this battery at just 27lbs comes in at half the weight of traditional batteries, while providing more than double the power, taking you farther and keeping you on the water longer. Get more than 2000 charge cycles, 4 times the life of a traditional SLA battery. 8 year, no-hassle warranty. 12V 20A Lithium Battery Charger (LiFePO4) recommended. 

Most Popular Applications:

12V Trolling motors (MotorGuide Xi3, MinnKota, Endura, etc.) 

Fishing Finders (Lowrance, Hummingbird, Garmin, Raymarine) 

Powering Devices (Phones, GoPro, Action Cams, etc.) 

LED Lighting 

Specifications: 

Chemistry: LiFePO4 (LFP)

Nominal Voltage: 12.8V

Rated Capacity: 100Ah

Energy: 1280 Wh

Dimension (Inches): 12 x 7 x 8.5  (Group 27)

Weight: 27 lbs/12 kg

Cycle life: >2000 cycles at 100% DOD at 0.5C rate

Internal Resistance: <40 mOhm at 50% SOC

Recommended Charge Cut-off Voltage: 14.0-14.4V

Max Charge Current: 100A

Recommended Charge Current: 50A

Max Discharge Current: 100A continuous and 130A for 2s

Discharge Cut-off Voltage: 10V (release at 11V)

Charging Temperature: 0 to 45℃ (32 to113 ºF)

Discharging Temperature: -20 to 60℃ (-4 to 140 ºF)

Storage Temperature: -20 to 45℃ (-4 to 113 ºF)

Terminals: M8

Connection: Up to 4 in parallel or 4 in series

Certifications: UN38.3, MSDS, UL1642 (for the cells only)

Waterproofing Rating: IP65

Warning: This is not intended to be used as a cranking battery

 

This 12V 50AH Lithium Battery Weighs only 13 pounds and the perfect solution for powering your fishing adventures. Built with cutting edge Lithium Iron Phosphate (LiFePO4) technology, this battery comes in at half the weight of traditional batteries, while providing more than double the power. Get more than 2000 charge cycles, 4 times the life of a traditional SLA battery. 8 year, no-hassle warranty. 12V 20A Lithium Battery Charger (LiFePO4) recommended. 

Most Popular Applications:

12V Trolling motors (MotorGuide Xi3, MinnKota, Endura, etc.) 

Fishing Finders (Lowrance, Hummingbird, Garmin, Raymarine) 

Powering Devices (Phones, GoPro, Action Cams, etc.) 

LED Lighting 

Specifications: 

Chemistry: LiFePO4 (LFP)

Nominal Voltage: 12.8 V

Rated Capacity: 50 Ah

Energy: 640 Wh

Dimension (Inches): 8 x 5.5 x 6 (Height without terminals)

Weight: 13 lbs/6 kg

Cycle life: >2000 cycles at 100% DOD at 0.5C rate

Internal Resistance: <40 mΩ at 50% SOC

Recommended Charge Cut-off Voltage: 14.0-14.4 V

Recommended Charge Current: ≤25 A

Max Charge Current: 50 A

Max Discharge Current: 50A continuous and 130A for 2s

Discharge Cut-off Voltage: 10 V(Release at 11 V)

Charging Temperature: 0 to 45℃ (32 to 113 ºF)

Discharging Temperature: -20 to 60℃ (-4 to 140 ºF)

Storage Temperature: -20 to 45℃ (-4 to 113 ºF)

Terminals: M6

Connection: Up to 4 in parallel or 4 in series

Certifications: UN38.3, MSDS, UL1642 (for the cells only)

Waterproofing Rating: IP55

 

This 12V 30AH Lithium Battery is the perfect solution for powering your fishing electronics, lights, and other 12-volt accessories. Built with cutting edge Lithium Iron Phosphate (LiFePO4) technology, this battery comes in at half the weight of traditional batteries, while providing more than double the power. Get more than 2000 charge cycles, 4 times the life of a traditional SLA battery. 8 year, no-hassle warranty. 12V 5A Lithium Battery Charger (LiFePO4) recommended. 

Most Popular Applications:

Fishing Finders (Lowrance, Hummingbird, Garmin, Raymarine) 

Powering Devices (Phones, GoPro, Action Cams, etc.) 

LED Lighting 

Specifications: 

Chemistry: LiFePO4 (LFP)

Nominal Voltage: 12.8 V

Rated Capacity: 30 Ah

Energy: 384 Wh

Dimension (Inches): 7.5 x 3 x 6.7    (Height without terminals)

Weight: 6 lbs/2.8 kg

Cycle life: >2000 cycles at 100% DOD at 0.5C rate

Internal Resistance: <30 mΩ at 50% SOC

Recommended Charge Cut-off Voltage: 14.0-14.4 V

Max Charge Current: 30 A

Recommended Charge Current: 15 A

Max Discharge Current: 30 A contentious

Discharge Cut-off Voltage: 10 V(Release at 10.5 V)

Charging Temperature: 0 to 45℃ (32 to 113  ºF)

Discharging Temperature: -20 to 60℃ (-4 to 140 ºF)

Storage Temperature: -20 to 45℃ (-4 to 113 ºF)

Terminals: M5

Connection: Up to 4 in parallel or 4 in series

Certifications: UN38.3, MSDS, UL1642 (for the cells only)

Waterproofing Rating: IP55

 

This 12V 10AH Lithium Battery is the perfect solution for powering your fishing electronics, lights, and other 12-volt accessories. Built with cutting edge Lithium Iron Phosphate (LiFePO4) technology, this battery comes in at half the weight of traditional batteries, while providing more than double the power. Get more than 2000 charge cycles, 4 times the life of a traditional SLA battery. 8 year, no-hassle warranty. 12V 3A Lithium Battery Charger (LiFePO4) recommended. 

Most Popular Applications:

Fishing Finders (Lowrance, Hummingbird, Garmin, Raymarine) 

Powering Devices (Phones, GoPro, Action Cams, etc.) 

LED Lighting 

Specifications: 

Chemistry: LiFePO4 (LFP)

Nominal Voltage: 12.8 V

Rated Capacity: 10 Ah

Energy: 1280 Wh

Cycle life: >2000 cycles at 100% DOD at 0.5C rate

Internal Resistance: <40 mΩ at 50% SOC

Recommended Charge Cut-off Voltage: 14.0-14.4 V

Weight: 3 lbs/1.36 kg

Dimension (Inches): 5.94 × 2.56 × 3.82 

Terminals: F2

Connection: Up to four batteries in series and eight batteries in parallel

This 12V 10A lithium battery charger (LIFEPO4) comes with alligator clips and is recommended to be used with 12V 50AH, and 12V 100AH Lithium batteries.

 

This 12V 10A lithium battery charger (LIFEPO4) comes with alligator clips and two spare fuses. Recommended to be used with 12V 50AH Lithium batteries. 

 

This 12V 10A lithium battery charger (LIFEPO4) comes with alligator clips and two spare fuses. Recommended to be used with 12V 30AH Lithium batteries.

 

This 12V 3A lithium battery charger (LIFEPO4) comes with alligator clips and two spare fuses. Recommended to be used with 12V10AH Lithium batteries